Shot Blasting Machines

Table Type Shot Blasting Machines
   
Shot Blasting Machines
APPLICATIONS
• Cleaning of castings and forging.
• Removal of heat treat scales
• Increasing pressure withstanding capacity of Die-Casting.
• Shot Peening of coil springs, Gears etc, to increase fatigue strength.
• Preparing bonding surface prior to painting.

BLASTING CHAMBER
Made out of thick steel plates. Welded steel construction suitably reinforced. Pitless design with thick wear resistant lining Ni-hard or Manganese steel liners
ROTARY TABLE
Table is fabricated from thick M.S.Plate with wear resistant rubber liner.
CHARGING DOOR
Manually operated ,Safety switch to prevent opening during blasting operation
ABRASIVE RECYCLING SYSTEM

Screw Conveyor at the bottom of the hopper moves abrasive to the boot section of the elevator. Elevator Lifts the shots to the shot hopper after removing of dust.

Turbine blast unit of double disc type equipped with throwing blades.

Abrasive separation in gravity type with separating tip air wash system and abrasive trap arrangement.

TECHNICAL DATA
 

MODEL

RT 30

RT 36

RT48

RT72

RT96

Table Diameter

760 mm

920 mm

1220 mm

1820 mm

2540 mm

LOADING CAPACITY

500 Kg

600 Kg

700 kg

2250 kg

3500 kg

No of turbines

1

1

1

1

2

SIZE OF TURBINE

300 x 63

380 X 63

495 X 63

485 X 63

495 X 63

TURBINE DRIVE

5 HP

10 HP

15 HP

25 HP

25 HP

TOTAL H P

12

19

24

39

71

SIZE D x H

760 X 350

920 X 400

1220 X 462

1820 X 1000

2540 X 1250

PLANT DIMENSIONS IN MM
 

L

1300

2100

2550

3500

3000

W

900

1200

1400

2000

3000

H

1450

1600

1800

2300

2500

H1

3350

4000

4250

4950

5740

S

250

250

250

250

250

Spinner Hanger Shot Blasting Machines

Spinner Hanger Shot Blasting Machines

APPLICATIONS

• Blast cleaning of components like automobile chassis, Bicycle and
   Motor-bike frames, radiators, etc. Prior to painting or similar surface
   treatment.
• Fettling of steel and alloy casting.
• Shot peening of automobile components like axles suspension parts
   etc. to increase fatigue strength.
• Deburing of gas cut pieces.
• De-scaling of welded components, forging etc.
• Cleaning of work pieces after hardening.

 

Fitted with double disc turbines designed to give efficient uniform blast cleaning and for longer life of wearing components.

13% MN STEEL WEAR resistant lining provided in direct blast zone for longer life of machine & for intense cleaning due to ricochet effect.

Machines can be supplied with overhead monorail complete with necessary support for designed loading. Rotating hooks provided for loading and un-loading.

Blast in three different position for intensive and effective penetration of the cores.

MONORAIL SYSTEM FOR HANDLING HANGERS

Monorail can also be provided for handling of hangers depending upon the load of castings. The system can also be automated for handling of hangers.

Any additional modification can be accommodated as per requirements.

TECHNICAL DATA
 

MODEL

SP 350

SP 450

HANGER SIZE

600 X 1300 H

750 X 1500 H

LOADING CAPACITY

750 KGS

1000 KGS

NO OF TURBINES

2

3

TURBINE SIZE

300 D X 63

380 D X 63

TURBINE DRIVE

10 HP

10 HP

TOTAL HP

28 HP

38 HP

DUST COLLECTOR

1300 CFM

1700 CFM

 
PLANT DIMENSIONS IN MM
 

H

1100

1500

W

1100

1400

H

2700

3000

H1

4800

5350

P

500

500

X

250

250

Tumblast type Shot Blasting Machines

 
Tumblast type Shot Blasting Machines
APPLICATIONS

• Cleaning of casting and forging.
• Removal of heat treatment scales.
• Automobile components
• Preparing the surface prior to electro-plating, Galvanizing, Metallising.
• Enameling, Rubberizing, Bakelite, Coating etc.
• Cleaning for re-conditioning.
• Plastic de-flashing.
• Shot peening of Springs, gears, etc to increase fatigue life.
• Etching for oil retaining properties to replace acid pickling.
• Many other applications for small components.

CONVEYOR FLIGHTS
Close fitting and reinforced for durability.

CONVEYOR LINKS
Tough one piece, Case hardened and stress relieved steel castings.

TRACTION WHEELS AND SPROCKETS
Fabricated from Steel Plates.

BARREL HEADS
Adjustable to keep mill tight protected with wear plates.

DOOR
Lined with wear plates, Travels in completely inter locking seal.

SEPARATORS
Compensating abrasive flow provides high efficiency separation with minimum adjustment.

TUMBLAST MODELS
Also available in both rubber and slat conveyor type.

TECHNICAL DATA
 
a a

RUBBER BELT

SLAT CONVEYOR

MODEL

20 X 27

27 X 36

27 X 36

CAPACITY

2 CU FT

5 CU FT

5 CU FT

NO OF TURBINES

1 NO

1 NO

1 NO

TURBINE SIZE

300 X 63

380 X 63

380 X 63

TURBINE DRIVE

5 H P

10 H.P.

15 H.P.

TOTAL H.P.

13 H.P.

18 H.P.

25 H.P.

PLANT DIMENSIONS IN MM
  

L

1100

1400

W1

610

1050

W2

865

1225

H1

1650

2015

H2

1750

2015

H

3750

4100

S

600

--